lpd3k9 - 
Button Buck
 | | 09/04/2007 9:12 PM |
| I have an older PSE bow. Does anyone have any suggestions on how to make it quieter. I don't have the money to replace it this year, so I would like to make it as quiet as possible. I will probably be handing this bow down to my daughter next year, so any help will be appreciated.
Thanks,
lpd3k9 | | | |
|
r_rayjr -
4-Pointer
Council Bluffs, Iowa
| | 09/05/2007 1:12 AM |
| How about adding some LimbSaver stuff to it. Here is a link for Bass Pro Shop that shows a few thing that you can buy in a bundle thing that should have everything you need. There are two different ones so look at both to see which on you want. There are other products that do the same thing, but this is just what I thought I would show you to get you started.
First set at...
Second set at...
Just click the "at..." thing above, I have the page link embedded into each one that is why it is underlined and/or a different color... | |
Ronald Lee Ray Jr.
rrjr11@cox.net
Disabled Navy Veteran | |
|
r_rayjr -
4-Pointer
Council Bluffs, Iowa
| | 09/05/2007 1:16 AM |
|
OOPS!!! I just noticed that the first set was for Crossbow. But they has the very same thing for any bow. In fact I think it is the same thing that they use on other bows. Looks like that same thing anyway.
| |
Ronald Lee Ray Jr.
rrjr11@cox.net
Disabled Navy Veteran | |
|
lpd3k9 -
Button Buck
| | 09/05/2007 7:15 AM |
| Thanks for your response, but I already have that stuff. Any other ideas?
lpd3k9 | | | |
|
Rilla -
Button Buck
New Iberia, Louisiana
| | 09/05/2007 3:03 PM |
| Make sure your bow is properly tuned. If the limbs or not in tune with each other (called tiller) it will make alot of noise when you release. Is the cabling and string up to date? Not old worn out ones right? Another suggestion is to make sure everything is tight, your sights, quiver, arrow rest, stabilizer...anything attached!!! Make sure you have the right arrows for your settup, if you have to light of an arrow, boy will it make a load twang!!!!
Hope these tips help....Rilla | |
7MM Rem. Mag. reach out and touch something!! | |
|
Whtbear -
Button Buck
Austin, Texas
| | 09/05/2007 5:11 PM |
| | Check the cams for excess wax from the string, others will tell you it can't get there, but it can and it makes them chatter . Try a very small amount of cam lube too. Make sure the you stabelizer fits tight against the face of the bow. You also might try having someone stand off to the side when you shoot to identifie where the sound comes from. Just my 2 Cents. | |
See ya in the woods,
whtbear | |
|
rebel deer hunter -
Record Book
florida
| | 09/06/2007 9:40 AM |
| | I have a pse the beast older bow solid limb, it used to be loud but i got some limbsaver solid limbsavers on , it string leaches , a limbsaver s-coil stabilizer and it is so quiet now, if your pse is a solid limb like mine they make a limbsaver hunter pack comes with limbsaver s-coil stabilizer, pair of limbsaver string leaches, and 2 limbsaver ultras for $39.99. its only for solid limbs, your bow will definatly be quieter and you can get this at www.basspro.com | |
SOUTHERN PRIDE | |
|
rebel deer hunter -
Record Book
florida
| | 09/06/2007 9:43 AM |
| | sorry just read the links above from r rayjr, you already have that and its not quieter? wow I dont know what to tell you then | |
SOUTHERN PRIDE | |
|
lpd3k9 -
Button Buck
| | 09/07/2007 8:12 AM |
| | Thanks for all the advise. I think I'm gonna take it in to my local dealer and see what he can do for me. I have a split limb, not solid. Thanks again for everyones help. I love this site!!!!! | | | |
|
rebel deer hunter -
Record Book
florida
| | 09/07/2007 8:13 AM |
| | any time man | |
SOUTHERN PRIDE | |
|
rackmaster4413 -
Button Buck
| | 09/07/2007 10:32 AM |
| | lube and tune and limbsavers and string leaches i had the same problems with my old bow | | | |
|