josiah030 - 
Button Buck
 | | 08/13/2007 6:44 PM |
| | i have a g5 meta peep sight and one of those aluminum ultra nocks. my problem is that my peep will not stay alighned. it splits the string in two and i have loosened the nock several times and adjusted it so that the peep is in alignment at full draw. works fine for about five arrows or so and then it goes out of alignment. its as if it settles into place and then stays there, it just wont settle aligned. i end up using my chin or nose to align it while im at full draw, which i can deal with target shooting but is no good in the stand. how do i get it to stay aligned? i know they make the ones with the rubber hose, but i almost lost an eye last winter when one of the damn things broke! any ideas would be greatly appreciated! | | | |
|
BOWHUNTER -
4-Pointer
Missouri
| | 08/13/2007 7:29 PM |
| | guy at work had the same problem with his peep site . he took it to the bow shop and he had to tightin a cable up I believe . but he wined up putting a new string on. and it works great now he says. | |
GIT-R-DONE | |
|
Vahntr -
Button Buck
Roanoke VA.
| | 08/14/2007 6:48 AM |
| | I had the same problem last year after I replaced my string, I took it to the pro shop had them put it in the vise and they twisted the string with the tension off and it has been fine ever since. | | | |
|
mcraddock -
6-Pointer
Possum Kingdom, SC
| | 08/14/2007 9:16 PM |
| | I am currently using one of those rubber hose deals on my current setup, but I used to use a peep that split the string into three strands instead of two. That configuration allows your eye to "blur" out a strand in your peep. I do not remember who makes it though... | | | |
|
matt_man215 -
Button Buck
FLorida
| | 08/21/2007 9:33 PM |
| | i use a rubber hose deal and just try to replace it wheneer it seems like it is ready to break | | |
|
|
pinetree -
4-Pointer
FAIRHOPE ALABAMA
| | 08/23/2007 11:08 AM |
| | MY IS CLOSE TO YOURS BUT IT SPLITS THE STRING THREE WAYS AND WORKS PRETTY GOOD | |
MIKE EVERETT | |
|
r_rayjr -
4-Pointer
Council Bluffs, Iowa
| | 08/24/2007 1:36 AM |
| Mine also has the rubber hose thing that lines it up at full draw.
| |
Ronald Lee Ray Jr.
rrjr11@cox.net
Disabled Navy Veteran | |
|
va_switchback_man -
Button Buck
| | 08/24/2007 10:20 PM |
| You may want to reconsider the ultra-nock. I had a similar problem but when I had my string replaced I the pro shop guy put just a plain string loop on and no problems since.
| |
Give a man a fish and feed him for a day. Teach a man to fish and feed him for a lifetime. | |
|
newhunter -
6-Pointer
Grandville,Michigan
| | 08/24/2007 11:00 PM |
| | I use the ultranok and what I had to do was loosen the ultranok use my fingers to straighten the peepsight and nok an arrow then tighten the ultranok, haven't had any problems since. might even work for you. | |
      
 
| |
|