Realtree
Big Bucks Special 2008
:: Register  Login ::

This is a link to the old forums.
www.buckmasters.com/forum

 Buckmasters Forums
Forums > Buckmasters Buck Talk > Bowhunting and Bow Help
Subject: Tekan G5 Mechanical
Prev Next
You are not authorized to post a reply.

AuthorMessages
timhornet - User is Offline
Button Buck
Button Buck





11/05/2007 2:11 PM  

I have hunted from a popup blind using fixed broadheads.  However this year I am shooting the Takan G5. Has anyone ever shot thru netting with this broadhead.  thanks  Timhornet

MJ - User is Offline
Forum Administrator
4-Pointer
4-Pointer





11/07/2007 7:24 PM  
I haven't tried it on the shoot through netting of a blind, but because of the cut on contact tip I'm guessing you "may" be alirght with it. I would suggest taking a shot or two through a panel on the back side (or other area you don't normally use) and check the hole to see if it looks like a small bullet hole (good) or if it has a larger slice (bad - blade deployed going through).
grimreaper - User is Offline
Spike
Spike
Mooseyards of Shawano, WI




11/07/2007 10:19 PM  
With it being a mech head I don't think it would work because the mesh might catch the blades and deploy them. I would do what MJ said to check for sure though as I have never tried it but I would also shoot at a target to see if it hits where you were aiming. I am not sure how cutting through the mesh affects arrow flight.
Only the dead have seen the end of war. Plato
You are not authorized to post a reply.
Forums > Buckmasters Buck Talk > Bowhunting and Bow Help > Tekan G5 Mechanical

U.S. Army

Advanced Deer Diary

Sign up for Tip of the Week

Name:
Email:
Copyright 2008 by Buckmasters LTD.